The whole point of an oil change is to keep your car in good working condition. The same is true of a Volkswagen. In order to keep your Volkswagen running optimally for as long as possible, you can take it in for an oil change at a Volkwagen Repair in Orlando but in case you want to learn the details, we’ll teach you where the oil plug is, and what the steps are to change your oil properly.

Where is the Oil Plug Located on Your Volkswagen?

As you’re changing the oil in your Volkswagen, you might find it helpful to jack up both sides of your car. 

Now, you don’t have to, and you could jack up just the front driver’s side corner, but it might be helpful for you to jack up both sides. This is due to where the oil plug is located—on the passenger side of the centerline of the vehicle. 

To get to that oil plug, you’ll want to make sure that you’ve raised the corner of the car enough so that you can be underneath it. Your jack should be used in conjunction with a jack stand too. Remember: it’s unsafe to work under a car that is only supported by a jack that could slip.

How to Change Volkswagen Oil

This is for you to understand the process. This is NOT intended for you to do your oil change. 

When it comes to changing your oil, first, you need to begin by having the right tools. This includes an oil filter wrench, an oil drainage pan, ramps, a flathead screwdriver, and a socket or open wrench. Optionally, you might want some rubber gloves, rags, and a funnel to ensure that the process is less messy for you.

As you’re preparing your tools, it’s a smart idea to grab your Volkswagen’s owner’s manual too. This will give you any details that you feel like you’re missing, and is a good idea to consult as you’re working.

Getting Started

First begin by allowing your engine to warm up. Just drive it for around 5 to 10 minutes in order to use up the old oil and get the oil flowing through the drainage.

You’ll want to prepare your vehicle too, meaning that you’ll need to park it somewhere that will have space for you to work like in your garage. At this point, you can get underneath your car to remove the splash pan using that screwdriver—just make sure to place a new container underneath to catch the oil.

Drain Your Oil

Now you can drain your oil. Look for the drain plug beneath the car—it’ll usually be a larger nut by that oil pan. Of course, you should have your car jacked up properly by this point, and need to make sure that it is safe and secure before you get underneath it.

Remove that drain plug and the oil will come pouring out, so just check that you’re prepared so that you don’t get oil everywhere.


While you’re waiting for your oil to drain, you can inspect the oil drain plug and the sealing washer. Replace your plug if it looks worn to prevent any damage or possible future oil leaks. The same goes for your washer.

From here, you can clean out any remaining oil and remove the old filter. You might need a wrench for this, and will need to keep your face clear while you work on this.

New Oil

At this point, you can replace your old filter with a new one, which you will need to secure with screws. Now, you’re ready to add the new oil. Just pour it into the top of the engine using that funnel, and refer to your car manual to figure out how much oil you’ll want to use. At this point, check around to make sure that you’re not leaking any oil before you drive off. Only use “APPROVED” oils in your engine. 


Changing your oil feels like a complicated process for most people. It is also the time to evaluate your vehicle’s condition. Checking tires, brakes, suspension, etc.  This is why we recommend letting an expert perform this service for you.  Many people also don’t want the hassle and mess of handling oil. If you want to hand over the task to auto repair experts, give us a call today and we’ll get it done for you the right way.